How to remove ceiling light cover with clips?

Well, if you get yourself a new ceiling light and don’t know how to remove the ceiling light cover with clips then don’t go anywhere we are here to solve your question with easy steps.

Most people think that removing a ceiling light cover is easy, but there are two methods right and wrong. If you, do it wrong, you could end up damaging the light or the ceiling. Here are some tips on how to remove a ceiling light cover the right way:

1. First, just turn off the power to the light. This can be done by switching off the circuit breaker or removing the fuse from the fuse box.

2. Once the power is off, you can start removing the light cover. Begin by unscrewing the screws that hold the cover in place. If the screws are tight, you may need to use a screwdriver to loosen them.

3. Once the screws are removed, gently pull the cover off of the light. If it is stuck, you can try using a putty knife to pry it loose.

4. Once the cover is removed, you can clean the glass or replace it with a new light.

The ceiling light cover can be removed in three various ways. It depends on the type of cover, the process is different.

Many have screws and without screws, and a few include clips. You need to learn how to remove the cover in these three situations.

Removing Plastic Ceiling Light Cover

Below are some steps that will show the entire method to you. Make sure you follow it step-by-step to provide the removal is done perfectly.

Get the Gloves

It is essential to arrange gloves to remove the ceiling light with clips.

You should use gloves in the case of clips because they are also small and very sharp. They can likely hurt your fingers. So, prevention is better than cure.

The type of gloves you should use while doing work. Like gloves are used in gardening because they are tough and protect hands. You should not use ordinary gloves, which can easily get Tared. They are not protective of your hands. use the mechanic gloves because they are built to handle the sharp edges during work.

Handel glass light very Carefully.

In this phase, you just need to hold the glass carefully. That means you are done with removing ceiling light clips and now taking out the glass light.

But once you have accomplished it, it is exposable, so Handel it carefully. And it is very delicate, so you have to be more careful while handling it.

You must ensure that you have a proper person to keep it safe. It is important, particularly when you only need to wash and put the glass back.

Search and Pull Out the Clip

In this case, you must remove them with Accessories that do not damage them. However, if it is not removable, it should be brooked and removed from the cover.

Use the small tools that are good enough to remove the clips and can’t damage the ceiling light inside them.

Pull Out the Glass

Now all you require to do is to pull out the clips. By using your hand.

You must remove Glass very firmly, but stay gentle with the clips, especially when they are removable or reusable.

As you’re done with it, you should be able to remove the light from the inside of the ceiling clips. It will make it free from the central mount of the ceiling. Now, you can do the work properly on the ceiling light.

If the light cover is dirty, you can clean it easily & even you can change your bulb if you want.

preview of Removing the ceiling light cover


Leave a Reply

Your email address will not be published. Required fields are marked *