Led strip lights should be reset if they stop working or are not responding to the controller. There are a few ways to reset Led strip lights, depending on your type of strip light.
If you have an LED strip light with a built-in controller, you can reset it by holding the reset button for 10 seconds. If your Led strip light has a remote control, you can reset it by pressing and holding the reset button on the remote for 10 seconds.
If you have an LED strip light without a controller, you can reset it by disconnecting it from power and then reconnecting it.
When you should Reset Led strip Lights?
There are a few reasons you might need to reset your led strip lights. First, if the lights are flickering or not working properly, this is usually an indication that they need to be reset.
If you’ve recently changed the batteries in your remote control, it’s also a good idea to reset the lights so they can sync up with the new remote. This will ensure that your lights are working correctly and efficiently.
Furthermore, to ensure your changes go into effect seamlessly, always reset your settings before making alterations to your led strip lights.
If you question whether or not you should reset your led strip lights, always take a look at the owner’s manual for more in-depth instructions.
Step by Step Instructions: How to Reset Led Strip Lights
Step 1: Plug in the LED Strip Light.
Ensure that the LED strip light is plugged into an outlet before trying to reset it.
To insert the plug, make sure your fingers are not touching any metal parts of the plug and carefully insert it into the outlet.
Step 2: Find the Reset Button.
To reset your LED strip light, find the reset button on the side or back of the unit. The button may be labeled as “Reset” or have a picture of a reset symbol.
Step 3: Turn off the LED Strip.
Before you do anything, find the reset button. Once it’s been located, cut off the LED Strip’s power by unplugging it from the outlet or using a power switch (if there is one).
Step 4: Take Out the Power Adapter.
Next, unplug the power adapter from the LED strip. Take care not to touch any metal parts as you do this.
You can tell if the power adapter is still plugged in by checking to see if the LED lights on the strip are lit. If they are, unplug the power adapter.
Step 5: Press and Hold the Reset Button.
To reset the device, locate the small reset button and press and hold it for 3 to 5 seconds. You might need a pen or another pointed object to push the button since it’s usually tiny.
Step 6: Plug in the Power Adapter Again.
Hold the reset button to reset your LED strip for the amount of time specified in the instructions. Once you’ve done that, plug the power adapter back into the Strip.
If you believe the power adaptor is plugged in, double-check to see if the LED strip lights are still illuminated. If they turn on, then it is correctly plugged in.
Step 7: Turn on the LED Strip Lights.
After you turn the LED strip lights on by flipping the switch or plugging it into the outlet, they should now be reset and functioning correctly.
Few Other Options to Reset Led Strip Lights:
1. Change the batteries: If your LED lights are battery-operated, one easy way to reset them is by changing them to new ones.
2. Use a different power source. If your power source isn’t working, try a different one. If you’re using AA batteries, go for AAA instead. If using an AC adapter, plug it into a surge protector or another outlet.
3. Adjust the settings. There’s a chance you only need to adjust the settings on your LED lights, like changing the brightness or light mode.
4. Clean the contacts. If your LED lights are not working after you have tried all of the other tips, try cleaning the contact points. Use a cotton swab or Q-tip to remove any dirt or residue off the contact points. After you have cleaned them, try powering on your lights again.
Why Are My Strip Lights Not Working?
There may be a few explanations if your LED strip lights are malfunctioning. To start troubleshooting, check that the power supply is plugged in and working as it should.
Try resetting the circuit breaker if your device is plugged in but not working. You could also benefit from plugging the power supply into another outlet.
If the power supply is not faulty, it’s probably an issue with the controller or remote. In this case, you will need to reset either the controller or remote.
The LED strip lights may not work correctly because of loose connections to the power supply. Ensure that all connections are tight.
Are my LED Lights Stuck on One Color?
If your LED lights will not change colors, it is probably because the remote control isn’t working right. First, double-check that the batteries are put in properly and that no corrosion interferes with the battery contacts.
If your batteries are alright, start by resetting the controller or remote. If that does not fix the issue, you might need to replace them instead. Another avenue you can explore is reconnecting the power supply- sometimes, that activates the LED lights again.
Led strip lights are a beautiful way to jazz up your home with extra light. But sometimes, for no apparent reason, they can start flickering or stop working entirely. If that happens to you, don’t fret! In this post, we’ll show you how easy it is to reset your led strip lights and get them shining brightly again.
Resetting your LED strip lights is easy and only takes a few minutes. You will need a screwdriver, wire strippers, and pliers.
You can reset your LED strip lights by cutting off the power supply and taking off the end cap of the light strip. Once you have done that, locate the solder points on the PCB and connect them using a metal object.
By following the steps we listed above, you should have your LED light strip reset in no time! If this guide was helpful to you or if you have any questions, please don’t hesitate to leave us a comment below. Thanks for reading!