Have you ever had your Led light strips fall off in the middle of a party? Or maybe you might be wondering how to make led lights sticky again. Don’t worry, we’ve all been there. The good news is that there are a few easy ways to restick Led light strips.
Best Way to Resticking LED Light Strips in 8 Easy steps
1. Use double-sided tape
This is the easiest way to get your Led light strips to stick again. All you need is some double-sided tape and you’re good to go. Just make sure that the surface is clean before you apply the tape.
2. Use hot glue
If the double-sided tape isn’t doing the trick, you can try using hot glue. This method is a little more permanent so make sure that you’re happy with the placement of the Led light strip before you glue it down.
3. Use Command strips
Command strips are perfect for temporary installations or for areas where you can’t use nails or screws. They come in a variety of sizes so you can find the perfect one for your Led light strip. Plus, they’re easy to remove so you can reposition them as often as you like.
4. 3M Adhesive:
The best option is when you want to put it into an awkward position that standard tape won’t stick to. You don’t have to worry about the tape wearing off either.
3M adhesive is simpler to install than double-sided tape that has a viscous glue coating.
5. Epoxy:
Though an epoxy adhesive will securely hold down the light strip, it takes much longer to set than a 3M adhesive.
In addition, you must combine two components (colorless and white), so be careful to use your measuring spoon since different types of epoxy have varying measurement systems!
6.E6000
If you need an adhesive that will make a stronghold and takes time to harden, this is the one you want. You can use it for applying strips in difficult-to-reach places or on curved surfaces (like wood or glass).
Step by Step Guide: How to Restick Led Light Strips
1. Get Rid of the Old Adhesives
To reattach your sticking LED light strips, the first step is to remove or scrape away any old adhesive. Once the old adhesive is removed, you can begin applying the new adhesive.
2. Clean the Surface Area
You should clean the surface area before applying the light strips.
Before applying fresh adhesive, clean it thoroughly with soap or a commercial cleanser like rubbing alcohol to ensure good adhesion.
3. Cut Your Light Strips To Size
To get started, cut your light strips to size. Depending on the area you’re trying to light up, you may need to adjust the length of your light strip.
Once you have the desired length, mark where you need to make the cuts.Next, use a sharp knife or scissors to make the cuts. Be sure to follow your marks carefully so that the light strip will fit properly.
4. Mount a Channel
Before you attach the LED light strips to the wall, you may need to build channels.If this is the case, you’ll need a larger led light strip channel that may accommodate the entire width of your LED lights.
Also, make sure they’re straight and firm in the grooves.
5. Apply New Adhesive
Apply the new adhesive according to the instructions. Make sure to follow the steps carefully so that your bonding experience is perfect. In order to adhere to the LED light strip, apply a thin layer of adhesive evenly on its back.
Make sure to line the edges up evenly before sticking them down on your wall so that they appear straight. Also, try not to overlap the adhesive strip onto itself as this will make it less sticky.
6. Let the strip dry
After applying your new led light strips back on correctly, then let them dry completely before turning them on again. Make sure you place them in a cool and dark area so they don’t peel away faster than expected!
7. turn on New Light Strips
After the adhesive has cured, you should be able to test your led light strips one last time to ensure that they are functioning correctly.
If you have previously had issues with power surges, it is best to plug your lights into a power strip. This will help reduce the chances of another outage by controlling the flow of energy.
8. Always Keep Your Adhesive Covered
If you want to keep your led light strips from falling down again, you should always conceal them.
I’d advise buying some adhesive covers to put on the strips when they’re not being used so that they don’t move about too much.
It will reduce the possibility of them getting injured or falling.
Tips to keep in mind while Installing led light strips
1. Use Double Sided Adhesive Tape
If your led light strips are coming loose for the first time, try using double-sided adhesive tape to keep them in place.
These tapes will keep your walls in place and prevent them from crumbling or peeling off. Before you begin using the tape, be sure it’s adhering and of good quality.
If your lights are continuously falling down due to a power surge or other problems, this is an excellent solution for keeping them in place without damaging your walls or ceiling.
2. Prepare Your Lights
Plan ahead by prepping your strip lights before installation for the best results.
It’s essential that you make certain the wires are properly aligned and don’t catch or curl against surfaces when connected.
3. wash your hands
Staying clean is the key to getting your led light strips installed correctly and making sure they stay put.
You’ll need no oil-based products like painter’s Vaseline on hand since this can damage adhesives if applied beforehand; make sure you’re hands are dry before sticking them down where another layer will go up against already existing paintwork near walls or ceilings (depending). And don’t forget about staying holy–the stuff we spray into our houses every day might come out again sooner than expected!
4. Apply them straight
It’s really important to make sure that your led light strips are straight when installing them.
You should check the work immediately after installation and make adjustments, if necessary because crooked lines will show up quickly on these devices which can cause issues later down the road with durability.
5. Use Mounting Putties
Mounting putties are the perfect solution for fixing any problems with your led light strips.
You can prevent your LED light strips from falling off by using a special type of mounting putty.
These products can be used on almost any smooth surface and will keep them in place, preventing pesky falls that might otherwise happen when you aren’t looking!
6. Use Brackets
For a more permanent solution to keeping your led light strips in place, we recommend you use brackets and attach them securely with adhesive or nails/screws.
Conclusion:
If your Led light strip is falling off, don’t panic! There are a few easy ways to get them to stick again. Just use double-sided tape, hot glue, or Command strips and you’ll be up and running in no time.
This is going to be an easy project, and you’re not going to record any mistakes along the way. We’ll help keep things moving smoothly if need be!